Introduction
DLC2 with Ethernet interface is the latest DLC2 series control card and is designed for laser processing applications with super high stability and low latency requirements.
Specification
| Model | DLC2-ETH-2D | DLC2-PCIE-3D |
|---|---|---|
| Compatible Software | EZCAD3 | |
| Communication | USB2.0 + ETHERNET | |
| Compatible Laser | Most of Fiber Lasers | |
| CO2, UV, YAG, Green laser can be controlled with a interface board. | ||
| Compatible Galvo | 2 Axis Galvo Scanner | 2 Axis / 3 Axis Galvo Scanner with XY2-100 Protocol |
| Motion Control | X | |
| I/O | 10 General TTL Inputs, 8 General TTL/OC Outputs | |
| Optional | 4 Axis Motion Control | |
| Marking on the Fly | ||
| Real-Time Camera Monitoring | ||
| SDK API | ||
Optional Add-ons
Dimension & Drawings
Table of Contents
FAQs
Packling List
Related Videos
Related Blogs
Laser Marking & Engraving Machines for Cell Phones
The laser marking machine has been widely applied in many industries for the marking of a variety of
November 15, 2022
How to Make 2.5D Deep Relief Engraving with EZCAD3?
2.5D Engraving System The 2.5D engraving system independently developed by JCZ can meet the need for complex engraving.
September 26, 2022
Minutes
Seconds
14 reviews for Ethernet Laser & Galvo Controller – EZCAD2 DLC2-ETH Series