Introduction
SCF-2.5D compact and small size closed 20W 30W laser engraver uses a motorized Z lift plus the latest EZCAD3 software and DLC controller for both 2D and 3D marking and deep engraving on stainless steel, aluminum, etc.
Specification
(20-30W) SCF-2.5D Q SERIES
| Model | SCF-2.5D-QS20 | SCF-2.5D-QS30 |
|---|---|---|
| Laser Generator | ||
| Laser Power(W) | 20W | 30W |
| Frequency(kHz) | 30-60kHz | 30-60kHz |
| Pulsed Width(ns) | 130ns | 130ns |
| Control System | ||
| Software | EZCAD2.14.11-LITE | |
| Controller | FBLI-B-LV4 | |
| Scanning System | ||
| Max. Engraving Speed(mm/s) | 6000mm/s (12000mm/s optional) | |
| Max. Engraving Size (mm) | 160*160mm（70*70, 100*100mm optional) | |
| Max. Engraving Depth(mm) | ＞100mm | |
| Others | ||
| Power Supply | 110V/220V Optional | |
| Cable Length | 3M (4/5M Optional) | |
| Adjustable Z Lift Travel | 500mm(700mm Optional) | |
| Cooling Method | Air Cooling | |
(20-30W) SCF-2.5D LP SERIES
| Model | SCF-2.5D-ELP20 | SCF-2.5D-ELP30 |
|---|---|---|
| Laser Generator | ||
| Laser Power(W) | 20W | 30W |
| Frequency(kHz) | 1-600kHz | 1-600kHz |
| Pulsed Width(ns) | 200ns | 200ns |
| Control System | ||
| Software | EZCAD2.14.11-LITE | |
| Controller | FBLI-B-LV4 | |
| Scanning System | ||
| Max. Engraving Speed(mm/s) | 6000mm/s (12000mm/s optional) |
|
| Max. Engraving Size (mm) | 160*160mm（70*70, 100*100mm optional) | |
| Max. Engraving Depth(mm) | ＞100mm | |
| Others | ||
| Power Supply | 110V/220V Optional | |
| Cable Length | 2M (3/4/5M Optional) | |
| Adjustable Z Lift Travel | 500mm(700mm Optional) | |
| Cooling Method | Air Cooling | |
(20-30W) SCF-2.5D M7 SERIES
| Model | SCF-2.5D-EM720 | SCF-2.5D-EM730 |
|---|---|---|
| Laser Source | ||
| Laser Power(W) | 20W | 30W |
| Frequency(kHz) | 1-4000kHz | 1-4000kHz |
| Pulsed Width(ns) | 2-350ns | 2-350ns |
| Control System | ||
| Software | EZCAD2.14.11-LITE | |
| Controller | FBLI-B-LV4 | |
| Scanning System | ||
| Max. Engraving Speed(mm/s) | 6000mm/s (12000mm/s optional) |
|
| Max. Engraving Size (mm) | 160*160mm（70*70, 100*100mm optional) | |
| Max. Engraving Depth(mm) | ＞100mm | |
| Others | ||
| Power Supply | 110V/220V Optional | |
| Cable Length | 2M (3/4/5M Optional) | |
| Adjustable Z Lift Travel | 500mm(700mm Optional) | |
| Cooling Method | Air Cooling | |
Optional Add-ons
Dimension & Drawings
Table of Contents
FAQs
Packling List
Related Videos
Related Blogs
How to Make 2.5D Deep Relief Engraving with EZCAD3?
2.5D Engraving System The 2.5D engraving system independently developed by JCZ can meet the need for complex engraving.
September 26, 2022
Laser Marking Machines For CharacteristicConsumer Electronics
Nowadays, laser marking machines develop maturely due to the improvement of laser technology and beam control and transmission
October 25, 2022
Minutes
Seconds
939 reviews for Small Closed 2.5D Deep Metal Laser Engraving Machine – SCF-2.5D Series