Introduction
TC series is with high-quality DAVI, Synrad, Coherent diode CO2 lasers together with a high-speed galvo scanner to engrave or mark any content on most of the non-metal materials.
Specification
| Model | TC-D30 | TC-D50 | |
|---|---|---|---|
| Laser Generator | |||
| Laser Power(W) | 30W | 50W | |
| Frequency(kHz) | 0-25kHz | 0-25kHz | |
| Control System | |||
| Software | EZCAD2 | ||
| Controller | SZLI-B-V4 | ||
| Scanning System | |||
| Max. Marking Speed(mm/s) | 6000mm/s (12000mm/s optional) |
||
| Max. Marking Size (mm) | 160*160mm (70*70, 100*100,200*200,300*300mm optional) |
||
| Others | |||
| Power Supply | 110V/220V Optional | ||
| Adjustable Z Lift Travel | 500mm(700mm Optional) | ||
| Cooling Method | Air Cooling | ||
Optional Add-ons
Dimension & Drawings
Table of Contents
FAQs
Packling List
Related Videos
Related Blogs
Flying Laser Marking Machines VS Non-flying Laser Marking Machines
In the marking field, it is commonly known that flying laser marking machines are the upgrade of traditional
October 20, 2022
How to Make 2.5D Deep Relief Engraving with EZCAD3?
2.5D Engraving System The 2.5D engraving system independently developed by JCZ can meet the need for complex engraving.
September 26, 2022
Minutes
Seconds
228 reviews for Table CO2 Laser Engraver & Marker – TC Series