Introduction
F3D series is equipped with the latest EZCAD3 software and a 3D galvo scanner for laser engraving or marking on both flat and irregular surfaces. It uses 20W, 30W, 50W, 60W, 80W, 100W Raycus and JPT MOPA laser and works on a variety of metal materials like stainless steel, aluminum, etc.
Specification
(20-50W) PF/TF/LCF-3D-QS SERIES
Model | PF/TF/LCF-3D-QS20 | PF/TF/LCF-3D-QS30 | PF/TF/LCF-3D-QB50 |
---|---|---|---|
Laser Generator | |||
Laser Power(W) | 20W | 30W | 50W |
Frequency(kHz) | 30-60kHz | 30-60kHz | 50-100kHz |
Pulsed Width(ns) | 130ns | 130ns | 130ns |
Control System | |||
Software | EZCAD3 | ||
Controller | DLC2-M4-3D | ||
Scanning System | |||
Max. Marking Speed(mm/s) | 5000mm/s | ||
Max. Marking Size (mm) | F=254 Lens: X=150mm, Y=150mm Z=70mm | ||
Others | |||
Power Supply | 110V/220V Optional | ||
Cable Length | 3M (4/5M Optional) | ||
Adjustable Z Lift Travel | 500mm(700mm Optional) | ||
Cooling Method | Air Cooling |
(20-50W) PF/TF/LCF-3D-ELP SERIES
Model | PF/TF/LCF-3D-ELP20 | PF/TF/LCF-3D-ELP30 | PF/TF/LCF-3D-ELP50 |
---|---|---|---|
Laser Generator | |||
Laser Power(W) | 20W | 30W | 50W |
Frequency(kHz) | 1-600kHz | 1-600kHz | 1-600kHz |
Pulsed Width(ns) | 200ns | 200ns | 200ns |
Control System | |||
Software | EZCAD3 | ||
Controller | DLC2-M4-3D | ||
Scanning System | |||
Max. Marking Speed(mm/s) | 5000mm/s | ||
Max. Marking Size (mm) | F=254 Lens: X=150mm, Y=150mm Z=70mm | ||
Others | |||
Power Supply | 110V/220V Optional | ||
Cable Length | 2M (3/4/5M Optional) | ||
Adjustable Z Lift Travel | 500mm(700mm Optional) | ||
Cooling Method | Air Cooling |
(20-100W) PF/TF/LCF-3D-EM7 SERIES
Model | PF/TF/LCF-3D-EM720 | PF/TF/LCF-3D-EM730 | PF/TF/LCF-3D-EM760 | PF/TF/LCF-3D-EM780 | PF/TF/LCF-3D-EM7100 |
---|---|---|---|---|---|
Laser Generator | |||||
Laser Power(W) | 20W | 30W | 60W | 80W | 100W |
Frequency(kHz) | 1-4000kHz | 1-4000kHz | 1-4000kHz | 1-4000kHz | 1-4000kHz |
Pulsed Width(ns) | 2-350ns | 2-350ns | 2-500ns | 2-500ns | 2-500ns |
Control System | |||||
Software | EZCAD3 | ||||
Controller | DLC2-M4-3D | ||||
Scanning System | |||||
Max. Marking Speed(mm/s) | 5000mm/s | ||||
Max. Marking Size (mm) | F=254 Lens: X=150mm, Y=150mm Z=70mm | ||||
Others | |||||
Power Supply | 110V/220V Optional | ||||
Cable Length | 3M (4/5M Optional) | ||||
Adjustable Z Lift Travel | 500mm(700mm Optional) | ||||
Cooling Method | Air Cooling |
Optional Add-ons
Dimension & Drawings
Table of Contents
FAQs
Packling List
- Stay Tuned
- Stay Tuned
Related Videos
Related Blogs
Laser Marking & Engraving Machines for Cell Phones
The laser marking machine has been widely applied in many industries for the marking of a variety of
November 15, 2022
How to Make 2.5D Deep Relief Engraving with EZCAD3?
2.5D Engraving System The 2.5D engraving system independently developed by JCZ can meet the need for complex engraving.
September 26, 2022
Minutes
Seconds
PASSWORD: @Kupg93EQXssknx
227 reviews for Fiber 3D Laser Engraver & Marker – PF/TF/LCF-3D Series