Introduction
TF-2.5D series table fiber laser engraving system is developed for engraving both 2D and 3D data on a 2D surface. No expensive 3D head is required, which means it is relatively much cheaper.
Specification
(20-50W) TF-2.5D Q SERIES
| Model | TF-2.5D-QS20 | TF-2.5D-QS30 | TF-2.5D-QB50 |
|---|---|---|---|
| Laser Generator | |||
| Laser Power(W) | 20W | 30W | 50W |
| Frequency(kHz) | 30-60kHz | 30-60kHz | 50-100kHz |
| Pulsed Width(ns) | 130ns | 130ns | 130ns |
| Control System | |||
| Software | EZCAD2.14.11-LITE | ||
| Controller | FBLI-B-LV4 | ||
| Scanning System | |||
| Max. Engraving Speed(mm/s) | 6000mm/s (12000mm/s optional) | ||
| Max. Engraving Size (mm) | 160*160mm（70*70, 100*100,200*200,300*300mm optional) | ||
| Max. Engraving Depth(mm) | ＞200mm | ||
| Others | |||
| Power Supply | 110V/220V Optional | ||
| Cable Length | 3M (4/5M Optional) | ||
| Adjustable Z Lift Travel | 500mm(700mm Optional) | ||
| Cooling Method | Air Cooling | ||
(20-50W) TF-2.5D LP SERIES
| Model | TF-2.5D-ELP20 | TF-2.5D-ELP30 | TF-2.5D-ELP50 |
|---|---|---|---|
| Laser Generator | |||
| Laser Power(W) | 20W | 30W | 50W |
| Frequency(kHz) | 1-600kHz | 1-600kHz | 1-600kHz |
| Pulsed Width(ns) | 200ns | 200ns | 200ns |
| Control System | |||
| Software | EZCAD2.14.11-LITE | ||
| Controller | FBLI-B-LV4 | ||
| Scanning System | |||
| Max. Engraving Speed(mm/s) | 6000mm/s (12000mm/s optional) |
||
| Max. Engraving Size (mm) | 160*160mm （70*70, 100*100,200*200,300*300mm optional) |
||
| Max. Engraving Depth(mm) | ＞200mm | ||
| Others | |||
| Power Supply | 110V/220V Optional | ||
| Cable Length | 2M (3/4/5M Optional) | ||
| Adjustable Z Lift Travel | 500mm(700mm Optional) | ||
| Cooling Method | Air Cooling | ||
(20-100W) TF-2.5D EM7 SERIES
| Model | TF-2.5D-EM720 | TF-2.5D-EM730 | TF-2.5D-EM760 | TF-2.5D-EM780 | TF-2.5D-EM7100 |
|---|---|---|---|---|---|
| Laser Source | |||||
| Laser Power(W) | 20W | 30W | 60W | 80W | 100W |
| Frequency(kHz) | 1-4000kHz | 1-4000kHz | 1-4000kHz | 1-4000kHz | 1-4000kHz |
| Pulsed Width(ns) | 2-350ns | 2-350ns | 2-500ns | 2-500ns | 2-500ns |
| Control System | |||||
| Software | EZCAD2.14.11-LITE | ||||
| Controller | FBLI-B-LV4 | ||||
| Scanning System | |||||
| Max. Engraving Speed(mm/s) | 6000mm/s (12000mm/s optional) |
||||
| Max. Engraving Size (mm) | 160*160mm （70*70, 100*100,200*200,300*300mm optional) |
||||
| Max. Engraving Depth(mm) | ＞200mm | ||||
| Others | |||||
| Power Supply | 110V/220V Optional | ||||
| Cable Length | 2M (3/4/5M Optional) | 3M(4/5M Optional) | |||
| Adjustable Z Lift Travel | 500mm(700mm Optional) | ||||
| Cooling Method | Air Cooling | ||||
Optional Add-ons
Dimension & Drawings
Table of Contents
FAQs
Packling List
Related Videos
Related Blogs
Laser Marking Machines for Glass Bottles
Laser Marking Machines–The Catalyst for the Development of the Glass Bottle Industry With the continuous improvement of living
December 6, 2022
How to Make 2.5D Deep Relief Engraving with EZCAD3?
2.5D Engraving System The 2.5D engraving system independently developed by JCZ can meet the need for complex engraving.
September 26, 2022
Minutes
Seconds
338 reviews for Table 2.5D Deep Metal Laser Engraving Machine – TF-2.5D Series