Introduction
PU series is a compact size engraver and marker with 355nm ultraviolet lasers for both metal and non-metal materials, with laser output power from 3W to 10W.
Specification
| Model | PU-L3A | PU-L5A | PU-S10 |
|---|---|---|---|
| Laser Generator | |||
| Laser Power(W) | 3W | 5W | 10W |
| Frequency(kHz) | 20-200kHz | 20-150kHz | 40-300kHz |
| Pulsed Width(ns) | 18ns | 18ns | 15ns |
| Control System | |||
| Software | EZCAD2 | ||
| Controller | SZLI-B-V4 | ||
| Scanning System | |||
| Max. Marking Speed(mm/s) | 6000mm/s (12000mm/s optional) |
||
| Max. Marking Size (mm) | 160*160mm (70*70, 100*100,200*200,300*300mm optional) |
||
| Others | |||
| Power Supply | 110V/220V Optional | ||
| Adjustable Z Lift Travel | 500mm(700mm Optional) | ||
| Cooling Method | Air Cooling | Water Cooling | |
Optional Add-ons
Dimension & Drawings
Table of Contents
FAQs
Packling List
Related Videos
Related Blogs
Laser Marking Machines For CharacteristicConsumer Electronics
Nowadays, laser marking machines develop maturely due to the improvement of laser technology and beam control and transmission
October 25, 2022
How to Make 2.5D Deep Relief Engraving with EZCAD3?
2.5D Engraving System The 2.5D engraving system independently developed by JCZ can meet the need for complex engraving.
September 26, 2022
Minutes
Seconds
224 reviews for Desktop UV Laser Engraver & Marker – PU Series