Introduction
SCF series is a small closed type engraver and marker with a full closure cabinet and laser protection door to improve safety during operation.
Specification
(20-50W) SCF-QS SERIES
| Model | SCF-QS20 | SCF-QS30 | SCF-QB50 |
|---|---|---|---|
| Laser Generator | |||
| Laser Power(W) | 20W | 30W | 50W |
| Frequency(kHz) | 30-60kHz | 30-60kHz | 50-100kHz |
| Pulsed Width(ns) | 130ns | 130ns | 130ns |
| Control System | |||
| Software | EZCAD2.14.11 | ||
| Controller | FBLI-B-V4 | ||
| Scanning System | |||
| Max. Marking Speed(mm/s) | 6000mm/s (12000mm/s optional) |
||
| Max. Marking Size (mm) | 150*150mm(70*70, 100*100mm optional) | ||
| Others | |||
| Power Supply | 110V/220V Optional | ||
| Cable Length | 3M (4/5M Optional) | ||
| Adjustable Z Lift Travel | 250mm | ||
| Cooling Method | Air Cooling | ||
(20-60W) SCF-ELP SERIES
| Model | SCF-ELP20 | SCF-ELP30 | SCF-ELP50 | SCF-EM720 | SCF-EM730 | SCF-EM760 |
|---|---|---|---|---|---|---|
| Laser Generator | ||||||
| Laser Power(W) | 20W | 30W | 50W | 20W | 30W | 60W |
| Frequency(kHz) | 1-600kHz | 1-600kHz | 1-600kHz | 1-4000kHz | 1-4000kHz | 1-4000kHz |
| Pulsed Width(ns) | 200ns | 200ns | 200ns | 2-350ns | 2-350ns | 2-500ns |
| Control System | ||||||
| Software | EZCAD2.14.11 | |||||
| Controller | FBLI-B-V4 | |||||
| Scanning System | ||||||
| Max. Marking Speed(mm/s) | 6000mm/s (12000mm/s optional) |
|||||
| Max. Marking Size (mm) | 150*150mm(70*70, 100*100mm optional) | |||||
| Others | ||||||
| Power Supply | 110V/220V Optional | |||||
| Cable Length | 2M (3/4/5M Optional) | 3M (4/5M Optional) | ||||
| Adjustable Z Lift Travel | 250mm | |||||
| Cooling Method | Air Cooling | |||||
Optional Add-ons
Dimension & Drawings
Table of Contents
FAQs
Packling List
Related Videos
Related Blogs
Flying Laser Marking Machines VS Non-flying Laser Marking Machines
In the marking field, it is commonly known that flying laser marking machines are the upgrade of traditional
October 20, 2022
How to Make 2.5D Deep Relief Engraving with EZCAD3?
2.5D Engraving System The 2.5D engraving system independently developed by JCZ can meet the need for complex engraving.
September 26, 2022
Minutes
Seconds
234 reviews for Small Closed Fiber Laser Engraver & Marker – SCF Series