Introduction
TF series separates the workstation from the machine body to make it lighter in weight and smaller in size. It is with fiber laser for products with metal materials.
Specification
(20-50W) TF-QS SERIES
| Model | TF-QS20 | TF-QS30 | TF-QB50 |
|---|---|---|---|
| Laser Generator | |||
| Laser Power(W) | 20W | 30W | 50W |
| Frequency(kHz) | 30-60kHz | 30-60kHz | 50-100kHz |
| Pulsed Width(ns) | 130ns | 130ns | 130ns |
| Control System | |||
| Software | EZCAD2.14.11-LITE | ||
| Controller | FBLI-B-LV4 | ||
| Scanning System | |||
| Max. Marking Speed(mm/s) | 6000mm/s (12000mm/s optional) |
||
| Max. Marking Size (mm) | 160*160mm(70*70, 100*100,200*200,300*300mm optional) | ||
| Others | |||
| Power Supply | 110V/220V Optional | ||
| Cable Length | 3M (4/5M Optional) | ||
| Adjustable Z Lift Travel | 500mm(700mm Optional) | ||
| Cooling Method | Air Cooling | ||
(20-50W) TF-ELP SERIES
| Model | TF-ELP20 | TF-ELP30 | TF-ELP50 |
|---|---|---|---|
| Laser Generator | |||
| Laser Power(W) | 20W | 30W | 50W |
| Frequency(kHz) | 1-600kHz | 1-600kHz | 1-600kHz |
| Pulsed Width(ns) | 200ns | 200ns | 200ns |
| Control System | |||
| Software | EZCAD2.14.11-LITE | ||
| Controller | FBLI-B-LV4 | ||
| Scanning System | |||
| Max. Marking Speed(mm/s) | 6000mm/s (12000mm/s optional) |
||
| Max. Marking Size (mm) | 160*160mm （70*70, 100*100,200*200,300*300mm optional) |
||
| Others | |||
| Power Supply | 110V/220V Optional | ||
| Cable Length | 2M (3/4/5M Optional) | ||
| Adjustable Z Lift Travel | 500mm(700mm Optional) | ||
| Cooling Method | Air Cooling | ||
(20-100W) TF-EM7 SERIES
| Model | TF-EM720 | TF-EM730 | TF-EM760 | TF-EM780 | TF-EM7100 |
|---|---|---|---|---|---|
| Laser Generator | |||||
| Laser Power(W) | 20W | 30W | 60W | 80W | 100W |
| Frequency(kHz) | 1-4000kHz | 1-4000kHz | 1-4000kHz | 1-4000kHz | 1-4000kHz |
| Pulsed Width(ns) | 2-350ns | 2-350ns | 2-500ns | 2-500ns | 2-500ns |
| Control System | |||||
| Software | EZCAD2.14.11-LITE | EZCAD2.14.11 | |||
| Controller | FBLI-B-V4 | ||||
| Scanning System | |||||
| Max. Marking Speed(mm/s) | 6000mm/s (12000mm/s optional) |
||||
| Max. Marking Size (mm) | 160*160mm （70*70, 100*100,200*200,300*300mm optional) |
||||
| Others | |||||
| Power Supply | 110V/220V Optional | ||||
| Cable Length | 2M (3/4/5M Optional) | 3M (4/5M Optional) | |||
| Adjustable Z Lift Travel | 500mm(700mm Optional) | ||||
| Cooling Method | Air Cooling | ||||
Optional Add-ons
Dimension & Drawings
Table of Contents
FAQs
Packling List
Related Videos
Related Blogs
Flying Laser Marking Machines VS Non-flying Laser Marking Machines
In the marking field, it is commonly known that flying laser marking machines are the upgrade of traditional
October 20, 2022
How to Make 2.5D Deep Relief Engraving with EZCAD3?
2.5D Engraving System The 2.5D engraving system independently developed by JCZ can meet the need for complex engraving.
September 26, 2022
Minutes
Seconds
216 reviews for Table Fiber Laser Engraver & Marker – TF Series