Introduction
MU series mini laser marker and engraver are equipped with high stability and high speed 3W 5W air-cooled laser source for high quality marking and engraving tasks on heat-sensitive materials like plastic, glass, and crystal. With its all-in-one small-size design, there is no doubt it is the most cost-effective model for both small businesses and hobbyists.
Specification
| Model | MU-G3 | MU-G5 |
|---|---|---|
| Laser Generator | ||
| Laser Power(W) | 3W | 5W |
| Frequency(kHz) | 1-150kHz | 1-150kHz |
| Pulsed Width(ns) | 15ns | 15ns |
| Control System | ||
| Software | EZCAD2 | |
| Controller | SZLI-B-V4 | |
| Scanning System | ||
| Max. Marking Speed(mm/s) | 6000mm/s (12000mm/s optional) |
|
| Max. Marking Size (mm) | 160*160mm (70*70, 100*100,200*200,300*300mm optional) |
|
| Others | ||
| Power Supply | 110V/220V Optional | |
| Adjustable Z Lift Travel | ||
| Cooling Method | Air Cooling | |
Optional Add-ons
Dimension & Drawings
Table of Contents
FAQs
Packling List
Related Videos
Related Blogs
How to Make 2.5D Deep Relief Engraving with EZCAD3?
2.5D Engraving System The 2.5D engraving system independently developed by JCZ can meet the need for complex engraving.
September 26, 2022
Laser Marking & Engraving Machines for Cell Phones
The laser marking machine has been widely applied in many industries for the marking of a variety of
November 15, 2022
Minutes
Seconds
220 reviews for Mini UV Laser Marking & Engraving Machine – MU Series