Introduction
Raycus single module continuous wave fiber lasers are widely used for laser cutting, welding, drilling, 3D printing, and other laser processing machines with the power of 250W, 500W, 750W, 1KW, 1.5KW, 2KW, and 3KW.
Specification
| Model | RFL-C300L | RFL-C500 | RFL-C750 | RFL-C1000 | RFL-C1500X | RFL-C2000X | RFL-C3000S |
|---|---|---|---|---|---|---|---|
| Average Output Power | 250W | 500W | 750W | 1000W | 1500W | 2000W | 3000W |
| Central Emission Wavelength | 1080±5nm | ||||||
| Operation Mode | CW/Modulate | ||||||
| Max. Modulation Frequency | 20kHz | 5kHz | |||||
| Output Power Stability | ±1.5% | ||||||
| Red Laser | Yes | ||||||
| Output Laser Head | QBH (Customizable) | ||||||
| M2 | 1.1 (25um) | 1.3 (25um) | 5-7 (50um) | ||||
| Polarization | Random | ||||||
| Fiber Cable Length | 15M (Customizable) | 20M (Customizable) | |||||
| Power Supply | 200-240VAC Single Phase | 380±10%VAC Three Phase Four Wire | |||||
| Control Mode | External RS232/External AD/Super Terminal | External RS232/External AD | |||||
| Output Power Adjusting Range | 10-100% | ||||||
| Size (LxWxH) | 485×237×748 mm | 485×237×900 mm | |||||
| Net Weight | 50KG | 80KG | 85KG | ||||
| Cooling Method | Water Cooled | ||||||
| Operation Temperature | 10-40℃ | ||||||
Optional Add-ons
Dimension & Drawings
Table of Contents
FAQs
Packling List
Related Videos
Related Blogs
Laser Marking Machines For CharacteristicConsumer Electronics
Nowadays, laser marking machines develop maturely due to the improvement of laser technology and beam control and transmission
October 25, 2022
How to Make 2.5D Deep Relief Engraving with EZCAD3?
2.5D Engraving System The 2.5D engraving system independently developed by JCZ can meet the need for complex engraving.
September 26, 2022
Minutes
Seconds
20 reviews for CW Fiber Lasers 250-3000W – Raycus Single-Mode Series