Introduction
150W 300W 450W 600W JPT quasi-continuous wave fiber laser are with both air and water cooling methods optional. It outputs both pulsed and CW lasers at the same time for high-quality cutting, welding, and other types of laser processing.
Specification
| Model | QCW-150 | QCW-300 |
|---|---|---|
| BPP | ≤2@50um | ≤0.55@25um |
| Fiber Cable Length | 5M (Customizable) | |
| Average Output Power | CW: 250W Pulse: 150W | CW: 400W Pulse: 300W |
| Max. Peak Power | 1500W | 3000W |
| Max. Pulse Energy | 15J | 30J |
| Adjustable Frequency Range | 0.001-10 kHz | |
| Adjustable Pulse Width Range | 0.01-10 ms | |
| Cooling Method | Air Cooled | |
| Power Supply | 220VAC Single Phase | 48VDC |
| Laser On/Off Time | ＜20us | |
| Central Emission Wavelength | 1080nm | |
| Emission Bandwidth@3dB | ＜4nm | |
| Operation Temperature | 10-40℃ | |
| Storage Temperature | -20-50 ℃ | |
| Net Weight | 52KG | 65KG |
| Size (LxWxH) | 483×752×177 mm | 483x648x234 mm |
Optional Add-ons
Dimension & Drawings
Table of Contents
FAQs
Packling List
Related Videos
Related Blogs
Flying Laser Marking Machines VS Non-flying Laser Marking Machines
In the marking field, it is commonly known that flying laser marking machines are the upgrade of traditional
October 20, 2022
How to Make 2.5D Deep Relief Engraving with EZCAD3?
2.5D Engraving System The 2.5D engraving system independently developed by JCZ can meet the need for complex engraving.
September 26, 2022
Minutes
Seconds
18 reviews for Quasi Continuous Wave Fiber Lasers – JPT 150W-300W