Introduction
J4410F is a customized resistor laser trimmer and micro cutter machine for linear and angular potentiometer, position, and displacement sensor with high speed and high precision.
Specification
| Model | J4410F-L1000 | J4410F-L500 | J4410F-C50 | |
|---|---|---|---|---|
| Basic | Sensor Type | Linear Displacement Sensor | Potentiometer / Angular Displacement Sensor | |
| Processing Dimension | L=25-1000mm | L=20-500mm | φ=50mm | |
| Independent Linearity | 20-50mm:≤±0.2% | 20-50mm:≤±0.25% | 10-25mm:≤±0.15% | |
| 50-125mm:≤±0.1% | 50-150mm:≤±0.2% | 25-70mm:≤±0.1% | ||
| 125-1000mm:≤±0.05% | 150-500mm:≤±0.1% | |||
| Target Precision | ±0.2% | |||
| Measuring System | Measuring Range | 100K-500KΩ | ||
| Measuring Precision | ＜160KΩ: 0.02% | |||
| ＞160KΩ: 0.04% | ||||
| Control System | Software | Self-developed Trimlab | ||
| Operation System | Win7/Win10 | |||
| Language | Multilingual | |||
| Software Customization | Optional | |||
| Others | Power Supply | 220V 50HZ 10A | ||
| Gas Pressure | 0.4-0.6Mpa | |||
| WorkingTemperature | 24±4℃ | |||
Optional Add-ons
Dimension & Drawings
Table of Contents
FAQs
Packling List
Related Videos
Related Blogs
Laser Marking Machines For CharacteristicConsumer Electronics
Nowadays, laser marking machines develop maturely due to the improvement of laser technology and beam control and transmission
October 25, 2022
How to Make 2.5D Deep Relief Engraving with EZCAD3?
2.5D Engraving System The 2.5D engraving system independently developed by JCZ can meet the need for complex engraving.
September 26, 2022
Minutes
Seconds
40 reviews for Potentiometer | Displacement Position Sensor Trimming & Cutting Machine – J4410F Series