Introduction
DLC2 with Ethernet interface is the latest DLC2 series control card and is designed for laser processing applications with super high stability and low latency requirements.
Specification
Model | DLC2-ETH-2D | DLC2-PCIE-3D |
---|---|---|
Compatible Software | EZCAD3 | |
Communication | USB2.0 + ETHERNET | |
Compatible Laser | Most of Fiber Lasers | |
CO2, UV, YAG, Green laser can be controlled with a interface board. | ||
Compatible Galvo | 2 Axis Galvo Scanner | 2 Axis / 3 Axis Galvo Scanner with XY2-100 Protocol |
Motion Control | X | |
I/O | 10 General TTL Inputs, 8 General TTL/OC Outputs | |
Optional | 4 Axis Motion Control | |
Marking on the Fly | ||
Real-Time Camera Monitoring | ||
SDK API |
Optional Add-ons
Dimension & Drawings
Table of Contents
FAQs
Packling List
- Stay Tuned
- Stay Tuned
Related Videos
Related Blogs
Laser Marking & Engraving Machines for Cell Phones
The laser marking machine has been widely applied in many industries for the marking of a variety of
November 15, 2022
Flying Laser Marking Machines VS Non-flying Laser Marking Machines
In the marking field, it is commonly known that flying laser marking machines are the upgrade of traditional
October 20, 2022
Minutes
Seconds
PASSWORD: @Kupg93EQXssknx
14 reviews for Ethernet Laser & Galvo Controller – EZCAD2 DLC2-ETH Series